HELICOIL® manual taps
Product type: 0140.2 | Thread type: Metric standard and fine thread | Packingunit: 1 pcs.

• 

Diameter (d)

• M 2
• M 2.5
• M 3
• M 3.5
• M 4
• M 5
• M 6
• M 7
• M 8
• M 8x1
• M 9
• M 10
• M 10x1
• M 10x1.25
• M 11
• M 12
• M 12x1
• M 12x1.5
• M 12x1.25
• M 14
• M 14x1.5
• M 14x1.25
• M 16
• M 16x1.5
• M 18
• M 18x1.5
• M 20
• M 20x1.5
• M 20x2
• M 22
• M 22x1.5
• M 24
• M 24x1.5
• M 24x2
• M 27
• M 30
• M 30x2
• M 33
• M 33x2
• M 36x3

Pitch (P)

• 0,4
• 0,5
• 0,6
• 0,7
• 0,8
• 0,45
• 1
• 1,5
• 1,25
• 1,75
• 2
• 2,5
• 3
• 3,5

Reset selection

For further information please contact us.

Description

Read on Hide

Typ 0140.2

Finishing tap (product type 0140.2)

Manual tap for through holes and blind holes to create holding threads (acc. to DIN 8140-2) for HELICOIL® coil thread inserts. A manual tap, a taper tap (product type 0140.1), is required in addition.

Properties:
• 2-pitch chamfer
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H

Note:
The taper tap (product type 0140.1) must be ordered as a separate item.